OUR FACTORY / EQUIPMENT
Mill-turn and Swiss-type machines in our own factory
Our own factory has 13 mill-turn machines, 16 Swiss-type lathes, 12 gang-tool lathes, 1 turret lathe and 2 cylindrical grinders. The factory is in Chashan Town, Dongguan.
On runs of 10,000+ pcs, we work out the process to the second on these machines, so the last batch runs like the first.
- Mill-turn
- 13 machines
- Swiss-type
- 16 machines
- Gang-tool
- 12 machines
- Turret
- 1 machine
- Grinding
- 2 machines
- Measuring
- 12 instrument types
STEP · PDF · DWG · NDA available
Equipment list updated .
Where a row lists two models, the quantity covers both.
Mill-turn machines
13 machinesTurned parts with milled features. Flats, cross holes and off-axis holes are turned and milled on the same machine. Diameters up to Ø200 mm run on our ST-45M machines after a chuck change. Mill-turn parts
| Equipment type | Brand | Model | Quantity |
|---|---|---|---|
| mill-turn machine | Tsugami | M06D/M08D | 2 |
| mill-turn machine | XINSO | ST-45M | 11 |
Swiss-type lathes
16 machinesSlender shafts, pins and small parts. Guide-bush support keeps long, small diameters true along their length. Swiss-type turning
| Equipment type | Brand | Model | Quantity |
|---|---|---|---|
| Swiss-type lathe | Tsugami | B0123/B0203 | 10 |
| Swiss-type lathe | Tsugami | B0125/B0205 | 5 |
| Swiss-type lathe | Citizen | Cincom R04 VI | 1 |
Gang-tool lathes
12 machinesShort turned parts in volume. Fast tool changes for short, compact turned parts in long runs.
| Equipment type | Brand | Model | Quantity |
|---|---|---|---|
| gang-tool lathe | Shengtesi | XCP-34/45 | 12 |
Turret lathes
1 machineTurned parts that need more tools. A turret carries more tools per setup for parts with many turned features.
| Equipment type | Brand | Model | Quantity |
|---|---|---|---|
| turret lathe | Miyano | BNC-42C5 | 1 |
Cylindrical grinders
2 machinesGround diameters. Outside-diameter grinding where the drawing asks for more than turning gives.
| Equipment type | Brand | Model | Quantity |
|---|---|---|---|
| cylindrical grinder | Wuxi | 850 | 2 |
EQUIPMENT / PART FIT
The right machine for your quantity
Swiss-type lathes for slender parts, mill-turn machines for parts with milled features, gang-tool lathes for short turned parts in volume. Yong Zhang, our Technical Director, sets the route when he reviews your drawing.
Trial runs from 200 pcs, production from 2,000 pcs.
MEASURING INSTRUMENTS
12 types of measuring instruments
Coordinate measuring machine · Vision measuring system · Air gauge · Surface roughness tester · Concentricity measuring instrument · Rockwell hardness tester and more.
See the full instrument listPREPARE A USEFUL MACHINING REVIEW
What to include with your drawing
Geometry & interfaces
Show the maximum diameter, overall length, slender sections, bores, threads and cross features. Identify the interfaces that locate, seal or move.
Material & quantity
Give the material grade, condition and quantity for each part number. Keep proposed repeat demand separate from the first-order quantity.
Acceptance requirements
Mark functional tolerances, datums, surface requirements and required records. Include any first-article approval stage you need.
EQUIPMENT QUESTIONS
Buyer questions about our machines
Which machines are Swiss-type lathes?
We run 16 Swiss-type lathes: 15 Tsugami and 1 Citizen. Models and quantities are listed above; see Swiss-type turning for the parts they make.
Can a part be finished in one setup?
Often. Mill-turn machines and live-tool Swiss-type lathes turn and mill many parts in one setup. The drawing review confirms whether a second operation is needed.
Can I choose a machine for my part?
Name a preferred machine or route if your purchasing specification requires it, with the reason. We confirm the route in the quotation.
NEXT STEP
Which machine suits
your part?
Send the component requirements that will decide the machining and inspection scope.