Precision turned parts. Built for production.
info@nowcnc.com+86 132 6712 4779
Get a quote

BATCH PRODUCTION / REPEAT ORDERS

High-volume CNC turned parts, from 200 pieces

Custom turned parts for batch orders and repeat production, made to your drawing.

  • Ø0.5–200 mm OD
  • ≤300 mm long
  • Per your drawing; ISO 2768-mK if none is stated
  • MOQ 200
  • Typical 15–20 days
Send a drawing for review

STEP, PDF or DWG · NDA on request

See production results
Repeated machined metal parts arranged in individual clear plastic trays.
Batch of machined parts in individual trays.

DOCUMENTED PRODUCTION ORDERS

Delivered high-volume production runs

These results describe individual orders and supply programs. Your quotation confirms the schedule for your part.

QUANTITY / UNIT PRICE

How CNC turned part prices change with batch size

≈25%

lower unit price at 2,000 pcs than at 200 pcs

Same drawing, material and finish · typical, varies by part

Setup share per part

Relative to one fixed setup at 200 pcs.

  1. 100%200 pcs
  2. 40%500 pcs
  3. 20%1,000 pcs
  4. 10%2,000 pcs

Setup is only part of the unit cost, so the unit price falls less than the setup share.

What else sets your unit price

  • Material and bar size

    Material grade and stock diameter affect material use and cost.

  • Cycle time per part

    The machining time needed for each part contributes to its cost.

  • Tolerances and inspection

    Tighter requirements can add machining and inspection work.

  • Outside finishing (anodizing, plating)

    The specified finish adds supplier processing and handling costs.

Figures are typical, not a price list. Your quotation shows the actual unit price for each quantity.

Compare quantity breaksHow batch size changes part price

A CLEAR SPECIFICATION AT EACH STEP

How CNC production orders work: first order to repeat batches

Quote
First order
Repeat

  1. You

    Send the drawing

    You send the revision, material, finish and quantity with your drawing.

    STEP · PDF · DWG · NDA

  2. NOW CNC

    Review and quote

    Our Technical Director reviews drawings with over 20 years’ experience.Reviewed byYong Zhang, Technical Director at NOW CNCYong Zhang

    First reply ≤24 h

  3. Together

    Agree approval points

    We agree the revision, acceptance criteria and approval points together.

    Cosmetic parts: trial batch first

  4. NOW CNC

    Make and inspect

    We machine, finish and inspect against the accepted drawing and quotation.Scheduled byMing Chen, Production Supervisor at NOW CNC, in the Swiss-type lathe areaMing Chen,Production Supervisor

    ISO 9001:2015

  5. NOW CNC

    Pack and ship

    We agree protection, labels and delivery arrangements in your quotation.

    Typical 15–20 days

  6. You

    Release next batch

    Previous orders guide review; changes still need approval.

    Changes reviewed first
Start step 01: send a drawingUse the RFQ checklistSee inspection evidence

QUALITY / FINISHED-PART HANDLING

Quality, inspection and packaging

  • Zeiss CMM

    Zeiss CMM in a temperature-controlled measuring room at our Dongguan factory.

  • Calibrated gauges

    4 gauges calibrated in March 2026 by CNAS-accredited labs (micrometers, coating-thickness gauge, gaussmeter). Next calibration due .

    Certificate numbers
    • Fischer DUALSCOPE MPOZKCD202603170021 · CNAS L12607
    • Mitutoyo 0–25 mmZKCD202603170022 · CNAS L12607
    • Mitutoyo 0–25 mmZKCD202603170023 · CNAS L12607
    • GS-2526KY039619116 · CNAS L0239

    Label S/N 72676793: next calibration due .

  • Coating thickness and residual-magnetism checks

    We check coating thickness with our Fischer DUALSCOPE MPO.

    We check residual magnetism for electronics parts that must be non-magnetic.

  • Quality system and finishing

    ISO 9001:2015 certificate

    For parts with cosmetic requirements, we run trial batches at the finishing supplier before production.

Zeiss CMM with a VAST XXT probe and reference sphere in the Dongguan factory measuring room.
Zeiss CMM · Dongguan factory measuring room.
Calibration label on instrument S/N 72676793 in the Dongguan factory.
Instrument calibration label · Dongguan factory.
Machined metal parts separated in white foam packaging
Parts separated in white foam trays.

Swipe to view all 3 photos

BUYER QUESTIONS

Questions about production orders

What is the typical lead time?

Typical lead time is 15–20 days. Large batches or outside finishing can take longer; your quotation states the date for your order. Production across all workshops is scheduled by our Production Supervisor, Ming Chen.

When will I hear back?

We reply to every inquiry within 24 hours on working days (China time). This is the first reply to your inquiry. With a complete PDF drawing and the quantity, the formal quotation follows within one working day. Weekends are excluded.

How should I list several part numbers?

List each separately, with its own drawing revision and quantities. Keep the material, finish, inspection and packaging scope clear for every part.

What is the overall manufacturing range?

Ø0.5–200 mm (0.02–7.87 in) outside diameter and up to 300 mm (11.81 in) long across the factory. Feasibility depends on the complete drawing.

Can I compare quantities for the same drawing?

Yes. Request the quantity breaks shown above against one drawing revision. Keep material, finish, inspection and packaging the same, and compare total order value as well as unit price.

How much does unit price drop at higher quantities?

Typically about 25% lower at 2,000 pcs than at 200 pcs for the same drawing, material and finish. Material, cycle time and finishing decide the exact difference; your quotation shows each price.

Which tolerances apply?

Tolerances on your drawing apply as drawn. For untoleranced dimensions we follow the general tolerance standard stated on the drawing; if none is stated, we work to ISO 2768-mK.

More buyer questions

YOUR NEXT PRODUCTION RUN

Ready to send a drawing?

Tell us about your part, your quantity and what matters most.

Let’s review your project