Get a quote
BUYER QUESTIONS
A factory — 13 mill-turn and 16 Swiss-type machines in Dongguan, China.
NOW CNC is the export brand of Shenzhen Mingzhouda Hardware Technology Co., Ltd. The brand and manufacturing operation belong to the same company.
Factory address: Building 1, 1st Floor, No. 20 Weixing Road, Chashan Town, Dongguan, Guangdong, China.
Custom mill-turn and Swiss-type components, from 200 pieces.
Our focus is turned components with milled or drilled features. Orders from 200 pieces suit trial runs; regular production runs start at 2,000 pieces. Block-shaped milled parts are not our focus, and we assess them case by case.
Ø0.5–200 mm (0.02–7.87 in) outside diameter, with part length ≤ 300 mm (≤ 11.81 in).
Our batch focus is Ø1–100 mm (0.04–3.94 in) parts in runs of around 2,000 pieces.
One setup is shared by ten times as many parts, so each carries 1/10 of it.
This is setup arithmetic, not an actual unit-price ratio; material and cycle time per part do not fall in the same way.
Compare setup shares by quantity · How batch size changes unit price
Send the drawing revision, material grade, quantity and inspection requirements.
We quote new parts from a PDF drawing with dimensions, tolerances and material; STEP / PDF / DWG files are welcome alongside it. Include the part number. Identify critical dimensions, datums, finish requirements and the records needed for acceptance.
Use our RFQ checklist · Questions to ask any supplier first.
We reply to every inquiry within 24 hours on working days (China time).
This is the first reply to your inquiry. With a complete PDF drawing and the quantity, the formal quotation follows within one working day. Weekends are excluded.
Typical lead time is 15–20 days.
Large batches or outside finishing can take longer; your quotation states the date for your order.
We run trial batches at the finishing supplier before production and inspect every cosmetic part.
See the anodized sleeves case for the supplier trials and visual inspection criteria.
Tolerances on your drawing apply as drawn.
For untoleranced dimensions we follow the general tolerance standard stated on the drawing; if none is stated, we work to ISO 2768-mK.
Yes. ISO 9001:2015 · ISO 14001:2015.
Shenzhen Mingzhouda Hardware Technology Co., Ltd. is the company behind NOW CNC. Its ISO 9001:2015 and ISO 14001:2015 certificates list the Dongguan factory as an audited site.
An NDA is available before you send your drawings.
You can start the inquiry with a part description.
EXW, FOB or DDP. With DDP we deliver duty paid to your door.
The quotation states the Incoterm agreed for your order.
BY MANUFACTURING TOPIC
We make custom turned components with milled, drilled or threaded features. Shafts with flats, sleeves with cross holes and threaded parts with wrenching features are examples of the geometry we review. Our focus is complete mill-turn components rather than block-shaped milled parts, which we assess case by case.
Yes. We run 13 mill-turn and 16 Swiss-type machines in our own factory in Dongguan. View equipment
Yes. Send one drawing revision and the quantity breaks you want quoted, so the quotations can be compared line by line.
Sometimes. Block-shaped parts are not our focus; we assess them case by case from the drawing.
Often, yes. A guide bushing can support slender bar stock close to the cutting point while material feeds through the machine. We have Swiss-type lathes; the actual route depends on your shaft diameter, length, features, stock and required checks.
Turned shoulders and mating diameters can be assessed alongside cross holes, flats or slots. The relationship among those features matters as much as their individual sizes; the drawing defines the datum and the inspection requirements for your part.
No. We produce custom shafts and pins against an agreed drawing. The photographs show steps, shoulders and cross features on parts photographed in our factory. Each inquiry carries its own geometry, material and production quantity.
Yes, when the drawing and tool access allow it. A sleeve can combine a turned outside diameter and bore with cross holes, flats or other milled details. The route is set by the full geometry and may involve more than one operation.
The bore, outer diameter, seating face and shoulders define the main inspection points. We review their size and relationship against the drawing, including which surfaces locate in the assembly and which dimensions apply after treatment.
Yes. Send one revision and compare several batch sizes with the same material and acceptance scope. The smaller release and any repeat demand should be identified separately when you ask for a quotation.
They can be planned as part of the same mill-turn component. Turning establishes the cylindrical body and thread; suitable live tooling can produce flats or other cross features. Actual setup count and tool access depend on the drawing and machine configuration.
The thread designation, engagement length and mating features belong in the specification. A sealing face or locating shoulder may need a separate requirement from the thread itself. We use those details to review the machining and inspection route.
No. We manufacture custom components to an agreed drawing and production quantity. The photographed examples show cylindrical bodies, external threads and wrenching flats. Thread designation, material and the mating interface are reviewed for each order.