Eye bore
Define the bore size, face requirements and relation to the stem axis.
Part example 03
Cross-axis components
An eye-shaped head on a stepped hollow stem. The two axes meet at an angle, so how they relate has to be dimensioned on the drawing.
Made to your drawingFrom 200 pcsBatch production
Request a similar part
What to specify on the drawing
Stepped stem
Separate mating diameters from nonfunctional clearance sections.
Intersecting opening
Show where openings connect and specify accessible edge conditions.
What decides the machining route
When two bores intersect, the drawing should define both axes and the condition at their intersection. The application determines whether additional functional testing is needed.
How we check it
Review bore size, relative position and internal-edge access as separate checks. Any pressure or leak test requires an agreed specification.
See inspection evidenceSizes and quantities we make
We turn parts from 0.5–200 mm (0.02–7.87 in) OD and up to 300 mm (11.81 in) long, starting at 200 pieces. Our main focus is 1–100 mm (0.04–3.94 in) OD parts in runs of 2,000 pieces or more.
See how batch size affects priceThis photo shows a part we have made before. We don't sell it from stock: your drawing sets the size, material and finish, and we quote the part as drawn.
Have a similar part?
Send the drawing with the material, quantity and the features that matter most. We'll note that you came from this example.
Prepare this inquiry
